By adopting DIP (dual in-line package) switch, the APC pure sine wave inverter provides more smart options for users to customize the performance of the device. Features of APC Pure Sine Wave Inverter, Charger 1. High overload ability of our APC charger is up to 300% rated power20 sec.
APC pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle). Power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V). Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.It has 15s delay before transfer when AC resumes, and overload protection when our APC pure sine wave inverter equips with generator. 10ms typical transfer time between battery and AC, which guarantees power continuity of APC charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads. Our APC charger allows start up and through power with depleted batteries.
Its powerful charge rate up to 90Amp. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries. LCD status display, battery/AC priority switch, USB communication port are available for our APC pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too. Slide to the left for full table.Capable of Starting Electric Motor. Pure Sine wave/Same as input(Bypass mode). Yes, Current Limit Function (Fault after 1sec). (2 for 24Vdc, 4 for 48Vdc).
10.5Vdc / 11.0Vdc. 10.0Vdc / 10.5Vdc.High Voltage Alarm & Fault. Wide: 90135VAC / 164243VAC; Narraw: 100135VAC / 194243VAC. 35A / 70-90A Max (Charger Current Control). 15.7V for 12Vdc (2 for 24Vdc, 4 for 48Vdc).
Charger curve(4 stage constant current) 4 step digital controlled progressive charge. Battery types (2 for 24Vdc, 4 for 48Vdc).Sine wave (Grid or Generator). 50Hz or 60Hz (Auto detect). 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz.
48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz. 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz. 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz. 30amp for UL & TUV.Status LEDs / Status LEDs+LCD. Before you paying the order, you should see the technical parameter carefully and confirm the inverter / automatic voltage regulator / stabilizer / solar controller / transformer / uninterrupted power supplier (UPS) can meet your requirement and solve your problem. Where do you need the inverter used for? Whats the type of the load and the total load capacity? Whats the input DC voltage?
Whats the output AC voltage do you need? Whats the kind of your battery? Lithium or others If you used the Lithium battery, please share the battery parameters with us to matching the inverter, such as the Rated voltage, Over voltage & Under voltage protecting parameter. Whats the type of yo.
If you have the solar power, do you need the related MPPT? If yes, please share the total capacity of solar panels. If you need the related MPPT, do you need the external single MPPT or the build-in MPPT? The build-in MPPT is built into the Inverter as an integrated Inverter. The item "APC DC24V AC230V 3.0KW YIY PURE SINE WAVE POWER INVERTER/CHARGER DC&AC EXCHANGE" is in sale since Sunday, August 4, 2019.
This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters". The seller is "jackyzhang910" and is located in Zhejiang. This item can be shipped worldwide.